WallTalker Cleaning Instructions

WallTalker Cleaning Instructions - Important maintenance for walltalkers® surfaces found in the following rooms - HSC104, HSC112, HSC211, TECH101, LRNC246. Failure to clean the surface properly will cause permanent damage to the walls. Please follow these instructions when using the Wall-Talker rooms.

• Use walltalkers brand dry erase markers or EXPO® brand for optimal performance.
• Erase the surface after each class session. 
• Remove dry erase markings with walltalkers or similar felt eraser for best possible results. Press firmly when erasing, using a circular motion. Change erasers as they become dirty. Dirty erasers will leave ink residue on the surface. WARNING: The hard plastic edges of Sanford EXPO type erasers may scratch the surface of the walltalkers.
• Additional cleaning with water and a soft cloth may be required. If ghosting occurs, wipe the board with a soft cloth dampened with water. Ghosting is the term used to describe any faint remnant of marker left on the board after dry erasing. The use of walltalkers towelettes will also remove the ghosting from the dry erase surface. DO NOT USE HOUSEHOLD GLASS CLEANERS ON THE walltalker SURFACE.
• For daily cleaning, rinse the surface with water. This may be done with a soft cloth or sponge. DO NOT USE HOUSEHOLD GLASS CLEANERS ON THE walltalker SURFACE. Dry the surface with a soft cloth prior to writing.
• If the recommendations above do not remove marks, use walltalkers dry erase cleaner or walltalkers towelettes. Once the material is clean, rinse the surface with water and dry with a soft cloth.
• For stubborn stains, use a paint/stain remover such as Goof Off®. Apply to a soft cloth, blot and/or rub gently over the stained area. After the stain has been removed, rinse with clean water and dry with a soft cloth. Follow the paint/stain remover manufacturer’s precautions before using.

CAUTION:

Do not use ballpoint pens or other sharp pointed instruments on the walltalkers surface. Erasers with sharp edges or plastic housing may scratch the walltalkers surface.

Do not use abrasive cleaners on the walltalkers.

Permanent marker may be removed with walltalkers dry erase cleaner or by writing over the markings with a dry erase marker.